Physical, chemical and microbiological analyses in our accredited laboratory, with impartial advice on the results.
Extended package from 2,400 TRY
A wrongly sized treatment system means both high investment and high operating cost. That is why every project starts with an analysis.
Analysis scope
- Basic package: pH, conductivity, TDS, hardness, turbidity, chlorine and iron; on-site measurement with same-day results.
- Extended package: nitrate, nitrite, ammonium, sulphate, chloride, silica and heavy metals (in the laboratory).
- Wastewater package: COD, BOD, TSS, oil and grease, total nitrogen and phosphorus.
Consulting
Water footprint studies, analysis of consumption and reuse potential, performance review of an existing treatment plant and discharge permit preparation. Reports are presented against regulatory limits.
The basic package for homes is free; the extended package for businesses starts at 2,400 TRY.
Scope of service
- Free basic analysis for homes
- Accredited laboratory
- Wastewater parameters
- Report compared with regulation
Water Analysis and Consulting — get a quote
Fill in the form and we will get back to you as soon as possible.
Frequently asked questions
How much reject water does a reverse osmosis unit produce?
Standard units produce about 3 litres of reject water per litre of pure water. In our pumped and tankless models this falls to 1:1. Reject water can be used for cleaning and irrigation.
How long does installation take?
Under-sink units are installed in 1.5 to 2 hours. A whole-house inlet filter and softener take three to five hours. Industrial systems are commissioned in 2 to 12 weeks depending on capacity.
When should I change filters?
Sediment filters are replaced at six months, carbon filters at 6-12 months and the RO membrane at 24-36 months. The device display and SMS reminder tell you when maintenance is due.
How long is the warranty on home units?
Home units have a three-year warranty and industrial systems two years. Consumables such as filters and membranes are outside warranty; we also commit to ten years of spare-part supply.
Which system suits well water?
A first analysis for iron, manganese, hardness and microbiology is needed. Typically a sand/carbon inlet filter, softener and UV sterilisation are used together; reverse osmosis is added for drinking water.